簡單辨別SKF進口軸承的真假:
Simply distinguish the true and false of SKF imported bearings.
1.結果看軸承的外包裝盒,通常的包裝盒為白字、藍底、下有赤色條。但近兩年的產物有花盒,圖案為多少個SKF牌號。
1. the results show that the outer packing box of the bearing is usually white, blue and red. But in the past two years, there are flower boxes and SKF patterns.
2.看進口軸承的生產日期,假若從側面打開軸承的包裝盒,盒上有生產日期及日期代碼。
2. Look at the production date of the bearing. If you open the packing box of the bearing from the side, the box has the production date and date code.
3.2000年后生產的進口軸承,其包裝盒上有條形碼。
After 2000, the production of bearings has a bar code on its package.
4.看進口軸承型號,進口軸承型號有后綴字母A、B、C、D、E等,這些字母分別代表差異的生產年份,具體資料見附表。
4. Look at the type of bearing, the type of bearing has the suffix letter A, B, C, D, E and so on, these letters represent the different production years, the specific information is shown in the attached table.
5.注意牌號上的SKF字體,S為上窄下寬,K和F的左邊豎畫上有凹坑。
5. pay attention to the SKF font on the brand, S for the upper and lower width, and K and F on the left side of the vertical picture with pits.
6.看鋼印,SKF進口軸承上標明型號、產地的字母有酸洗和激光加工兩種。用手摸時較為平滑,假進口軸承的字體通常是刻上去的。
6. look at the steel stamp. The SKF bearing is marked with the type and the origin letter has two kinds of pickling and laser processing. The handle is smooth when the hand is touched, and the font of the false bearing is usually carved.
7.看產地,球軸承產地:馬來西亞、意大利、法國、美國(美國產進口軸承通常只在美邦本土應用);短圓柱軸承產地:德國;角接觸球軸承產地:奧地利;球面滾子軸承產地:馬來西亞(通常為小型2315、2316、2318)、瑞典(大型號)、德國(大型號);滾針軸承產地:德國。
7. Look at the origin of ball bearings: Malaysia, Italy, France, the United States (U.S. bearings are usually only used in the United States); short cylindrical bearings: Germany; angular contact ball bearings: Austria; spherical roller bearings: Malaysia (usually small 2315, 2316, 2318), Sweden (large). No.), Germany (large size), needle roller bearings: Germany.
8.進口軸承開包后,大軸承通常為密封塑料袋,小軸承為塑料包裝紙。軸承上有一層油脂,真進口軸承外游歷明,無銹蝕和點蝕。
8. after the bearing is opened, large bearings are usually sealed plastic bags, and small bearings are plastic wrapping paper. There is a layer of grease on the bearing. There is no rust and pitting on the true bearing.
生產廠地 生產國度 生產類別
Production site production country production category
11 Sweden 1.3 - self aligning ball bearing roller bearing
15 英國 3 ——調心滾子軸承
15 Britain 3 - spherical roller bearings
15 大不列顛 3 ——調心滾子軸承
15 great Britain 3 - spherical roller bearings
18 Germany 7.2 - cylindrical roller bearings tapered roller bearings
21 法國 0 ——深溝球軸承
21 France 0 - deep groove ball bearings
23 奧地利 6—— 角接觸球軸承
23 Austria 6 angle contact ball bearing
28 澳大利亞—— 角接觸球軸承
28 Australia - angular contact ball bearings
29 意大利 0.8.6—— 角接觸球軸承、推力軸承 球面軸承
29 Italy 0.8.6 angular contact ball bearings and thrust bearings spherical bearings.
56 馬來西亞 0.3 ——深溝球軸承 調心滾子軸承
56 Malaysia 0.3 - deep groove ball bearing self-aligning roller bearing
72 USA 6—— 角接觸球軸承
72 USA 6 - angular contact ball bearings
有了以上的進口軸承知識自己可以從表面上分別出來,如果還不行只有找他們的代理商,最好的辦法是直接找代理商購買。
With the above bearing knowledge they can be separated from the surface, if not only to find their agents, the best way is to find agents directly to buy.
青島駿馳精工軸承有限公司為德國SFAG軸承的山東總代理,為企業(yè)做一站式軸承配送服務并提供軸承方面的技術支持。提供SKF,NSK,Nachi,SFAG,F(xiàn)AG,IKO等國外軸承及人本,哈爾濱、洛陽、瓦崗店等國內知名品牌軸承。軸承包括深溝球軸承,調心球軸承,圓錐滾子軸承,調心滾子軸承,圓柱滾子軸承,角接觸球軸承,滾珠絲杠軸承,滾針軸承,推力球軸承,帶座外球面軸承,直線軸承及指尖陀螺軸承等,歡迎各大企業(yè)來店洽談合作。