1、進口軸承保養

 

　　1. Maintenance of imported bearings

 

　　為了盡可能長時間地以良好狀態維持進口軸承本來的性能，須保養、檢修、以求防事故于未然，確保運轉的可靠性，提高生產性、經濟性。

 

　　In order to maintain the original performance of imported bearings in good condition for as long as possible, it is necessary to maintain, overhaul, prevent accidents in the future, ensure the reliability of operation, improve productivity and economy.

 

　　保養最好相應機械運轉條件的作業標準，定期進行。內容包括監視運轉狀態、補充或更換潤滑劑、定期拆卸的檢查。

 

　　Maintain the best operating standards for the corresponding mechanical operation conditions and carry out them regularly. The contents include monitoring operation status, replenishment or replacement of lubricants, and regular disassembly inspection.

 

　　作為運轉中的檢修事項，有進口軸承的旋轉音、振動、溫度、潤滑劑的狀態等等。

 

　　As a maintenance item in operation, there are imported bearing rotating sound, vibration, temperature, lubricant status and so on.

 

　　2、進口軸承的檢修

 

　　2. Overhaul of imported bearings

 

　　進口軸承的清洗：拆卸下進口軸承檢修時，首先記錄進口軸承的外觀，確認潤滑劑的殘存量，取樣檢查用的潤滑劑之后，洗進口軸承。作為清洗劑，普通使用清洗劑、煤油。

 

　　imported bearing cleaning: when removing the imported bearing for maintenance, first record the appearance of the imported bearing, confirm the residual amount of lubricant, sample and inspect the lubricant, wash the imported bearing. As cleaning agents, cleaning agents and kerosene are commonly used.

 

　　拆下來的進口軸承的清洗，分粗清洗和細清洗，分別放在容器中，先放上金屬的網墊底，使進口軸承不直接接觸容器的臟物。粗清洗時，如果使進口軸承帶著臟物旋轉，會損傷進口軸承的滾動面，應該加以注意。在粗清洗油中，使用刷子清除去潤滑脂、粘著物，大致干凈后，轉入精洗。

 

　　The cleaning of the dismantled imported bearings is divided into coarse cleaning and fine cleaning. They are placed in containers respectively. The metal mesh pad is placed at the bottom of the container to prevent the imported bearings from directly contacting the containers'dirt. In rough cleaning, if the imported bearing is rotated with dirt, the rolling surface of the imported bearing will be damaged and attention should be paid. In crude oil wash, remove grease and adhesive with brush. After cleaning, turn to fine wash.

 

　　精洗，是將進口軸承在清洗油中一邊旋轉，一邊仔細的清洗。另外，清洗油也要經常保持清潔。

 

　　Fine cleaning is to wash the imported bearings one by one while cleaning the oil. In addition, cleaning oil should also be kept clean.

 

　　進口軸承的檢修和判斷：為了判斷拆卸下來的進口軸承是否可以使用，要在進口軸承洗干凈后檢查。檢查滾道面、滾動面、配合面的狀態、保持架的磨損情況、進口軸承游隙的增加及有無關尺寸精度下降的損傷，異常。非分離型小型球進口軸承，則用一只手將內圈支持水平，旋轉外圈確認是否流暢。

 

　　Repair and judgment of imported bearings: In order to judge whether the imported bearings can be used, the imported bearings should be inspected after cleaning. Check the condition of raceway surface, rolling surface and mating surface, the wear of cage, the increase of inlet bearing clearance and the damage of irrelevant dimension precision decline. For non-detached small ball inlet bearings, the inner ring is supported horizontally with one hand and the outer ring is rotated to confirm its fluency.

 

　　圓錐滾子進口軸承等分離形進口軸承，可以對滾動體、外圈的滾道面分別檢查。

 

　　Separate inlet bearings such as tapered roller inlet bearings can inspect the raceway surfaces of the rolling element and the outer ring separately.

 

　　大型進口軸承因不能用手旋轉，注意檢查滾動體、滾道面、保持架、擋邊面等外觀，進口軸承的重要性愈高愈須慎重檢查。

 

　　Large-scale imported bearings can not be rotated by hand. Pay attention to check the appearance of rolling element, raceway surface, cage, sidewall and so on. The more important the imported bearings are, the more careful they must be checked.