通常來說，只要SKF軸承在良好的工作環境下，正確使用的話是不會部分SKF軸承那樣損壞的。但是這個屬于精密零件的青島SKF軸承到底為什么會損壞呢？

 

　　Generally speaking, as long as SKF bearings in good working conditions, the correct use of the words will not be part of the SKF imported bearing as damage. But why is the Qingdao bearing SKF of precision part damaged?

 

　　工程師分析得出，很多SKF軸承的損壞時因為超過了SKF軸承所能承受的載荷或者沒有很好的密封、過緊的配合導致的SKF軸承的間隙過小等。而且不同的原因的會導致不同的SKF軸承損壞形式或者留下不同損壞的痕跡。而我們在諸多案例中也發現，有1/3的SKF軸承是因為疲勞損壞，另1/3是因為潤滑不好，還有1/3是因為工作環境不清潔，進入了污物或者裝置不正確。

 

　　Engineer's analysis shows that many SKF bearings are damaged because they exceed the load that SKF bearings can bear or do not have a good seal, the clearance of SKF bearings is too small due to tight matching, etc. And different reasons will lead to different forms of SKF bearing damage or leave different traces of damage. In many cases, we also found that 1/3 of SKF bearings were fatigue damaged, another 1/3 were due to poor lubrication, and 1/3 were due to unclean working environment, into dirt or incorrect device.

 

　　為了盡可能的減少SKF軸承發生損壞，我們平時要注意保持SKF軸承和工作環境的清潔，不要讓灰塵及其他污物進入SKF軸承中。其次，在安裝時要注意不要施加過于強大的壓力。

 

　　In order to minimize the damage of SKF bearings, we should always pay attention to keeping the SKF bearings and working environment clean, do not let dust and other dirt into the SKF bearings. Secondly, be careful not to exert too strong pressure when installing.